Winkelen op categorieën
De volgende      Vorige
Mail naar vrienden Toevoegen aan favorieten
Prijs: $13.84
Koop in app

Scan de productcode om direct te kopen.

Volg onderstaande stappen:

1.Ga naar de download-installatie-app van Google en Apple Market

2.Open de SUNSKY-app en scan de linker QR-code

SUNSKY gratis app
   1 Eenheid $13.84  
   2+ Eenheden $13.70  
   5+ Eenheden $13.49  
   10+ Eenheden $13.29  
   20+ Eenheden $13.02  
   50+ Eenheden $12.60  
   100+ Eenheden $12.19  
Opties:  
Volume-aankoop
Voeg toe aan winkelwagen
Koop nu
Dropship on Shopify
land / regio:
Verzending:   Door
Meer methoden
Verzendmethode Verzending Transittijd
Avatar
Verkoopsmanager: Ms. Tiffany
+86-13723491653
+86-13723491653
+86-13723491653
We streven altijd naar lage prijzen en goede kwaliteit, en beloofden verzekerde en retourservice.
Bekijk de after-sales voorwaarden
S-IP5S-0048
  • S-IP5S-0048.jpg
  • S-IP5S-0048_1.jpg
  • S-IP5S-0048_2.jpg
  • S-IP5S-0048_3.jpg
  • S-IP5S-0048_4.jpg
  • S-IP5S-0048_5.jpg
  • S-IP5S-0048_6.jpg
  • S-IP5S-0048_7.jpg
Item #: S-IP5S-0048
Click Count 85475 Klik telling
Koop samen en ontvang extra korting
EXTRA 2% UIT
$2.29 $2.24
EXTRA 2% UIT
$1.00 $0.98
EXTRA 2% UIT
$3.69 $3.62
EXTRA 2% UIT
$4.27 $4.18
EXTRA 2% UIT
$2.51 $2.46
TIP: Als je ze samen koopt, geniet je zowel van de normale korting als de extra korting. De normale korting wordt berekend over het mandbedrag en de laatste 180 dagen bestellingen. Controleer de details in het winkelmandje.

Uitgelichte producten

Reserveonderdelen

Recent bekeken

Gratis geschenk (We verzenden het artikel met het onderstaande gratis geschenk)

Omschrijving



Over het product
1. Vervanging LCD + Frame + Touch Pad Digitizer Vergadering voor iPhone 5S
2. Vervang de oude, gebroken, gebarsten, beschadigde
3. Laat uw apparaat er frisser uitzien dan ooit
4. Volledig fit en werken
5. Elk item is gecontroleerd en in goede staat voor verzending
6. Professionele installatie wordt sterk aanbevolen. We zijn niet verantwoordelijk als het scherm eenmaal is geïnstalleerd.

Opmerkingen vóór installatie
1. Tips 1: Test voor installatie
Verwijder bij het testen geen beschermende film of plaatjes. Let op het probleem van statische elektriciteit.
Voordat u met een reparatie begint, moet u zich aarden met een ESD-riem (elektrostatische ontlading). Dit voorkomt dat statische elektriciteit de elektronische componenten in de telefoon beschadigt.
Zorg ervoor dat u oogbescherming draagt ​​en wees voorzichtig dat u uw vinger niet snijdt met de glassplinters.
2. Tips 2: simuleert testen
Schermvervanging is een zeer kwetsbaar product. We raden ten zeerste aan om vóór installatie te testen. Simuleert het testen, wat betekent dat de mobiele telefoon apart is, (moederbord + LCD of scherm) aangesloten audiokabel en nieuwe vervanging, inschakelen, test voltooid. Als de test OK is, installeer deze dan. Als het niet kan worden weergegeven, neem dan de eerste keer contact met ons op. En forceer het alstublieft niet om het in een mobiele telefoon te installeren. We zijn niet verantwoordelijk als het scherm eenmaal is geïnstalleerd.
3. Tips 3: Buig de kabel niet te ver
Zorg ervoor dat de LCD-kabel niet te veel buigt. Een bocht van meer dan 90 graden veroorzaakt een zwarte weergave.

Voordelen
1. Grote voorraad, snelle levering, kan voldoen aan een groot inkoopplan
2. Originele topkwaliteit.
3. Volledige pasvorm en werk
4. Lever kwaliteitsgarantie met professionele service
Specificatie:
Algemeen
Compatibel met
pakket gewicht
Een pakketgewicht 0.10kgs / 0.22lb
Aantal van een doos 100
Gewicht van een doos 8.00kgs / 17.64lb
Grootte van een doos 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch
Container laden 20GP: 333 Dozen * 100 Stuk = 33300 Stuk
40HQ: 773 Dozen * 100 Stuk = 77300 Stuk
Ranglijst Bestsellers
#2326 Categorie: Reserveonderdelen
#7 Categorie: Reserveonderdelen »  iPhone 5S-onderdelen
#3 Categorie: Reserveonderdelen »  iPhone 5S-onderdelen »  LCD scherm
LCD is Bubble Bag Protected, we will not offer warranty for installation.

Meer foto's

S-IP5S-0048
S-IP5S-0048
S-IP5S-0048
S-IP5S-0048
S-IP5S-0048
S-IP5S-0048
S-IP5S-0048
We versturen dit gratis geschenk samen met de bestelling:
SP7239

GIDS: iPhone 5s Front Panel Replacement

Use this guide to replace the cracked or broken screen on your iPhone 5s by swapping out the front panel. The front panel does not include the home button, front camera assembly, earpiece speaker, or the LCD shield plate. To reassemble your device, follow these instructions in reverse order.

Buy these parts and tools
Download Guide

Step 1 - Front Panel Assembly

  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.
  • Lay overlapping strips of clear packing tape over the iPhone's display until the whole face is covered.
  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.
  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

Step 2

  • Power off your iPhone before beginning disassembly.
  • Remove the two 3.9 mm Pentalobe screws from either side of Lightning connector.

Step 3

  • In the following steps you will be pulling the display up out of the phone body. The display is composed of a glass screen and a plastic bezel with metal clips.
  • Regardless of the tool you use, you need to be sure you pull up the entire display.
  • If the glass begins to separate from the plastic, as shown in the first image, slide a plastic opening tool between the plastic frame and the metal phone body to pry the metal clips out of the case.
  • If you are reassembling a phone with a separated display bezel, you may want to place a thin strip of adhesive between the plastic bezel and the glass to keep the phone closed.

Step 4 - LCD Screen Opener Opening Procedure

  • The next two steps demonstrate using the LCD Screen Opener, a great tool for safely opening the iPhone 5s that we recommend for anyone doing more than one repair. If you aren't using the LCD Screen Opener, skip to step 5.
  • Close the handle on the LCD Screen Opener, opening the suction-cup jaws.
  • Place the bottom of your iPhone in between the suction cups, against the plastic depth gauge.
  • The top suction cup should rest just above the home button.
  • Open the handles to close the jaws of the LCD Screen Opener. Center the suction cups and press them firmly onto the top and bottom of the iPhone.

Step 5

  • Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case.
  • The LCD Screen Opener is designed to safely open your iPhone just enough to separate the pieces, but not enough to damage the home button cable.
  • Peel the two suction cups off your iPhone.
  • Skip the next three steps and continue on step 8.

Step 6 - Manual Opening Procedure

  • If you don't have an LCD Screen Opener, use a single suction cup to lift the front panel:
  • Press a suction cup onto the screen, just above the home button.
  • Be sure the cup is completely on the screen to get a tight seal.

Step 7

  • The front panel is attached with clips, and there are several ribbon cables connecting it to the rest of the phone. Your goal here is to release the clips and open the phone only enough to disconnect the cables. Go slowly and carefully to avoid damage.
  • Make sure the suction cup is firmly attached to the front panel assembly near the home button.
  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the home button end of the front panel from the rear case.
  • With a plastic opening tool, gently pry the edges of the rear case down, away from the front panel assembly, while you pull up with the suction cup.
  • Take your time and apply firm, constant force. The 5s front panel assembly is a much tighter fit than most devices.

Step 8

  • Do not try to completely remove the front panel assembly from the rear case, as there are several ribbon cables still attached at the top of the iPhone.
  • Pull the plastic nub to release the vacuum seal on the suction cup.
  • Remove the suction cup from the display assembly.

Step 9

  • Open the phone just enough to reveal the metal bracket covering the home button cable.
  • Do not open the phone too far or you risk damaging the home button cable, or the socket it plugs into. Keep the cable loose—if it is stretched taut, that's too far.
  • Only the phone's original home button assembly will be capable of using the Touch ID functionality. If you rip the cable, installing a new home button will only restore ordinary home button functions, not the Touch ID features.
  • Use the tip of a spudger to push the bracket free and remove it with tweezers.
  • During reassembly, be sure to orient the bracket so that the single-prong side faces the bottom of the phone and the side with two slits faces the battery.

Step 10

  • Use the tip of a spudger to pry the home button cable connector up out of its socket.
  • Be sure you're separating the cable connector from its socket, and not prying the entire socket up. The socket is on its own glued-down cable that can be pried up if you aren't careful.

Step 11

  • Once the connector has been released, pull the home button end of the assembly away from the rear case, using the top of the phone as a hinge.
  • Open the display to about a 90 degree angle, and lean it against something to keep it propped up while you're working on the phone.
  • Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.
  • In a pinch, you can use an unopened canned beverage to hold the display.

Step 12

  • Remove the two 1.6 mm Phillips #000 screws securing the metal battery connector bracket to the logic board.

Step 13

  • Remove the metal battery connector bracket from the iPhone.

Step 14

  • Use the flat end of a spudger to gently pry the battery connector up from its socket on the logic board.
  • Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.

Step 15

  • Remove the following screws securing the front panel assembly cable bracket to the logic board:
  • One 1.7 mm Phillips #000 screw
  • One 1.2 mm Phillips #000 screw
  • One 1.3 mm Phillips #000 screw
  • One more 1.7 mm Phillips #000 screw
  • This 1.7 mm screw tends to not be attracted to a magnetized screwdriver. Take care not to lose it when removing.
  • It is especially important to keep track of your screws in this step for reassembly. Accidentally using the 1.3 mm screw or one of the 1.7 mm screws in the bottom right hole will result in significant damage to the logic board causing the phone to no longer boot properly.
  • Be careful not to over-tighten the screws, and don't force them. If they don't fit easily when you are securing them, they may be the wrong size.

Step 16

  • Remove the front panel assembly cable bracket from the logic board.

Step 17

  • Use the flat end of a spudger to disconnect the front-facing camera and sensor cable.

Step 18

  • While still supporting the front panel, disconnect the LCD cable connector.
  • When reassembling your phone, the LCD cable may pop off the connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.

Step 19

  • Finally, disconnect the digitizer cable connector.

Step 20

  • Remove the front panel assembly from the rear case.

Step 21 - Earpiece Speaker

  • Remove the two screws securing the upper component bracket:
  • 4.0 mm Phillips #000
  • 2.3 mm Phillips #000
  • It is imperative that the right screws are inserted into their respective holes. Otherwise it may cause severe damage to the LCD during reassembly.

Step 22

  • Orient the phone as shown, with the home button on top and the earpiece speaker on bottom.
  • Gently dislodge the clip, near the bottom left corner of the earpiece speaker bracket, outwards from its recess on the front panel assembly.
  • Do not pry with excessive force, as the earpiece speaker bracket is fragile and malleable.
  • With a set of tweezers, shift the bracket to the left to unclip it.

Step 23

  • Remove the bracket from the display.

Step 24

  • Remove the earpiece speaker with a set of tweezers.
  • If you use your fingers, be very careful not to touch the gold contacts on the front panel. Finger oil can prevent good contact.

Step 25

  • Using the edge of a set of tweezers or a metal spudger, gently pry the earpiece speaker contact cable up, to separate this portion of the camera and sensor cable from the adhesive below.
  • Only pry directly under the earpiece speaker contacts—there are sensors and microchips that can be damaged by prying elsewhere.

Step 26

  • Use the point of a spudger to lift the ambient light sensor and proximity sensor out of their recess in the display assembly.
  • There is a small, square plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly.
  • If replacing the proximity sensor make sure that the holder remains adhered to the back of the display. If it comes off with the old proximity sensor, remove it from the old sensor and use a tiny bit of adhesive to re-attach it to the back of the display.

Step 27

  • Use the flat end of a spudger to gently peel the front-facing camera portion of the cable away from the display assembly.

Step 28

  • If you are reattaching the same shield plate to a new display, there is no need to peel the cable assembly off the LCD shield plate. Skip this step.
  • Carefully peel the cable assembly off of the LCD shield plate to remove it from the display.
  • Be careful not to grab the digitizer cable while peeling up the front facing camera and sensor assembly cable.

Step 29 - Home Button Assembly

  • Unscrew the single captive Phillips #000 screw securing the home button cable.
  • The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.

Step 30

  • Fold the home button cable down, out of the way of the home button bracket.

Step 31

  • Remove the two 1.4 mm Phillips #000 screws from the home button bracket.

Step 32

  • Remove the home button bracket from the display assembly.

Step 33

  • Wedge the the tip of a spudger underneath the home button cable assembly.
  • The home button cable is affixed by mild adhesive.
  • Gently work the spudger underneath the cable to separate the home button cable from the front panel assembly.
  • Do not remove the home button yet, as it is still attached to the front panel assembly.

Step 34

  • If necessary, remove the tape over the home button on the front side of your cracked front panel assembly.
  • Gently push the top left corner of the home button up away from the front panel.
  • Do not push the home button all the way through—you only need to get a corner free, so that you can pry it free with a spudger.
  • This membrane is very thin. If you feel like you're going to tear the button, apply heat and try again.

Step 35

  • Peel the home button the rest of the way off of the display by prying gently with a spudger.

Step 36

  • Remove the home button assembly from the front panel.

Step 37 - Front Panel

  • Remove the 2.7 mm Phillips #000 screw from the back of the display assembly.

Step 38

  • Remove two 1.2 mm Phillips screws from each side of the LCD frame (four total).
  • To avoid stripping the final screw, it may be helpful to first slightly loosen all four screws before removing any.

Step 39

  • Remove the LCD shield plate from the display assembly.
  • Front panel remains.

Beoordelingen

Lofprijs
4.7 Sterren
4-5 Sterren:
96%
3 Sterren:
4%
1-2 Sterren:
0%
De klanten die het product kopen en recensies van goede kwaliteit schrijven, kunnen 10 SUNSKY-punten krijgen($0.20).
Sk****als
from Nelspruit
South Africa
  Bestelnummer: 2002205839   SKU: S-IP5S-0048B  
03/16/2020 10:09
Mob****ess
from Ventspils
Latvia
  Bestelnummer: 1909104840   SKU: S-IP5S-0048B  
11/25/2019 06:56
MKh***fa
from victoria
Seychelles
Bestelnummer: 1908021556   SKU: S-IP5S-0048B  
11/25/2019 04:25
Anselm*****ntino
from Varzea do Poco
Brazil
Bestelnummer: 1809205541   SKU: S-IP5S-0048B  
11/12/2019 06:37
Eug*****984
from roma
Italy
  Bestelnummer: 1807122532   SKU: S-IP5S-0048B  
10/08/2019 05:18
Eug*****984
from roma
Italy
  Bestelnummer: 1807122532  
10/08/2019 05:16
Eug*****984
from Roma
Italy
  Bestelnummer: 1809232563   SKU: S-IP5S-0048B  
10/08/2019 05:02
Red***ds
from Praha 6
Czech
  Bestelnummer: 1901096351   SKU: S-IP5S-0048B  
04/10/2019 15:04
Gu**35
from Leverkusen
Germany
  Bestelnummer: 1903103932   SKU: S-IP5S-0048B  
04/01/2019 14:17
TOR***RO
from roma
Italy
Bestelnummer: 1810101558   SKU: S-IP5S-0048B  
11/16/2018 12:08


Verzendmethoden

Om alle verzendkosten van verschillende vervoerders weer te geven, selecteert u het aantal en uw land, en drukt u vervolgens op [Calc].
land / regio:


We gebruiken cookie om u de beste ervaring te bieden op onze website. Door verder te gaan, gaat u akkoord met het gebruik van Cookie Ik ga akkoord

Bericht

Prijsmatch
Item #:
* URL waar voor minder verkocht:
Opmerking / details:
Foutenrapport
Item #:
Fout-URL:
* Invoerfout:
Omschrijving:
Foutbeeld:
(gif/jpg/png, 500KB max)
 
 
Abonnement op aankomstbericht

Item #:
Laat uw e-mailadres en naam achter, we sturen u een e-mail en bericht zodra dit artikel op voorraad is.
* Jouw email:
Your Name:
* Aantal stuks:
[$13.70] LCD-scherm en digitizer volledige montage voor iPhone 5S (wit)
4.7 Uit 5 gebaseerd op 301 Gebruikersbeoordelingen