https://www.sunsky-online.com Thu, 06 Nov 2025 23:40:00 GMT 60 China Electronics Wholesale and Dropshipping https://www.sunsky-online.com/p/TBD0606423201/XUYUAN-12V-24V-To-220V-Car-Power-Inverter-LED-Display-Power-Converter-Spec-600W.htm Thu, 06 Nov 2025 18:28:27 GMT 4070718

1. Multiple sockets + multiple USB ports, sharing multiple devices with one unit
2. Compatible with various appliances, suitable for home use/office use/car and truck use/electric vehicles and most other appliances
3. Built-in multiple safety protections, overcharge protection, overcurrent protection, overvoltage protection, overload protection, undercurrent protection, short circuit protection, undervoltage protection, overheat protection
4. Intelligent temperature-controlled fan, automatically cooling and dissipating heat
5. Low noise design, silent operation
6. One-key switch design, quick response

Parameters
1. Input voltage: 12/24V
2. Output voltage: 220 ± 5%
3. Output frequency: 50Hz
4. Output waveform: corrected sine wave
5. No-load loss: less than 0.2A
6. Maximum power amplifier: 600W / 1200W: more than 95%; 2000W: more than 90%
7. Low-voltage alarm: 10V - 11V
8. Low-voltage shutdown: 10V ± 2V
9. High-voltage shutdown: 15V ± 2V
10. Over-temperature protection: 55℃ - 77℃
11. Operating temperature range: 0℃ - 40℃
12. Size: 600W: about 20.5 x 11 x 5.5cm; 1200W: about 26 x 10 x 5.5cm; 2000W: about 30.5 x 10 x 5.5cm ]]> https://www.sunsky-online.com/p/EDA005808418/For-Huawei-Nova-14-Pro-OEM-Charging-Port-Board.htm Thu, 06 Nov 2025 18:29:58 GMT 4070602
1. Charging port board replacement part.
2. This part is used to replace your damaged or unworkable one with a new one.
3. Each item has been checked and in good condition before shipping.
4. Completely fit and work.
5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. ]]> https://www.sunsky-online.com/p/EDA006504807A/For-OnePlus-Ace-6-5G-Tree-%26-Cat-Embossed-Pattern-Flip-Leather-Phone-Case-Pink-.htm Thu, 06 Nov 2025 18:31:03 GMT 4070627
1. Durable: PU + TPU material, wear-resistant and durable. With good performance and quality can be used for a long time.
2. Holder Function: The stand feature frees your hands while reading, movie-watching, and so on.
3. Convenience: All buttons and ports can be accessed, charged, and connected to the headphone cable without removing the phone case.
4. Wallet Function: The leather case is equipped with card slots for placing cards and a small amount of cash.
5. Protection: It adequately protects devices from the normal scratches, dirt, tear and wear.
6. Easy to carry: With a short lanyard, it is convenient to go out. ]]> https://www.sunsky-online.com/p/EDA006504806H/For-OnePlus-15-Tree-%26-Cat-Embossed-Pattern-Flip-Leather-Phone-Case-Coffee-.htm Thu, 06 Nov 2025 18:32:21 GMT 4070622
1. Durable: PU + TPU material, wear-resistant and durable. With good performance and quality can be used for a long time.
2. Holder Function: The stand feature frees your hands while reading, movie-watching, and so on.
3. Convenience: All buttons and ports can be accessed, charged, and connected to the headphone cable without removing the phone case.
4. Wallet Function: The leather case is equipped with card slots for placing cards and a small amount of cash.
5. Protection: It adequately protects devices from the normal scratches, dirt, tear and wear.
6. Easy to carry: With a short lanyard, it is convenient to go out. ]]> https://www.sunsky-online.com/p/EDA006804803A/For-Honor-Magic8-Pro-CD-Magsafe-Magnetic-Cloth-Texture-Phone-Case-Black-.htm Thu, 06 Nov 2025 18:34:19 GMT 4070651
1. Made of TPU + PU material, wear-resistant and durable.
2. Raised edge around screen and camera lens helps protect against scratches.
3. Fully protect the device from normal scratches, dirt, tears and wear.
4. All ports and buttons can be used normally without removing the case.
5. Magnetic wireless charging is supported.

Note: The actual product is subject to the title model, and the picture model is for reference only. ]]> https://www.sunsky-online.com/p/EDA005121237/For-Honor-X70-OEM-Charging-Port-Board.htm Thu, 06 Nov 2025 18:34:29 GMT 4070590
1. Charging port board replacement part.
2. This part is used to replace your damaged or unworkable one with a new one.
3. Each item has been checked and in good condition before shipping.
4. Completely fit and work.
5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. ]]> https://www.sunsky-online.com/p/EDA006505005A/For-Realme-15T-5G-Tree-%26-Cat-Embossed-Pattern-Flip-Leather-Phone-Case-Pink-.htm Thu, 06 Nov 2025 18:38:37 GMT 4070639
1. Durable: PU + TPU material, wear-resistant and durable. With good performance and quality can be used for a long time.
2. Holder Function: The stand feature frees your hands while reading, movie-watching, and so on.
3. Convenience: All buttons and ports can be accessed, charged, and connected to the headphone cable without removing the phone case.
4. Wallet Function: The leather case is equipped with card slots for placing cards and a small amount of cash.
5. Protection: It adequately protects devices from the normal scratches, dirt, tear and wear.
6. Easy to carry: With a short lanyard, it is convenient to go out. ]]> https://www.sunsky-online.com/p/EDA008784201A/For-Honor-Magic8-Pro-CD-Magsafe-Magnetic-Litchi-Texture-Phone-Case-Black-.htm Thu, 06 Nov 2025 18:39:23 GMT 4070712
1. Made of TPU + PU material, wear-resistant and durable.
2. Raised edge around screen and camera lens helps protect against scratches.
3. Fully protect the device from normal scratches, dirt, tears and wear.
4. All ports and buttons can be used normally without removing the case.
5. Magnetic wireless charging is supported.

Note: The actual product is subject to the title model, and the picture model is for reference only. ]]> https://www.sunsky-online.com/p/EDA005788521/For-Huawei-Nova-14-Pro-Original-Speaker-Ringer-Buzzer.htm Thu, 06 Nov 2025 18:39:59 GMT 4070593
1. Loudspeaker replacement part.
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Completely fit and work.
5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. ]]> https://www.sunsky-online.com/p/EDA005788522/For-Huawei-Nova-14-Original-Speaker-Ringer-Buzzer.htm Thu, 06 Nov 2025 18:40:00 GMT 4070594
1. Loudspeaker replacement part.
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Completely fit and work.
5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. ]]> https://www.sunsky-online.com/p/EDA005788525/For-Huawei-Enjoy-80-Original-Speaker-Ringer-Buzzer.htm Thu, 06 Nov 2025 18:40:00 GMT 4070597
1. Loudspeaker replacement part.
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Completely fit and work.
5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. ]]> https://www.sunsky-online.com/p/EDA005788523/For-Huawei-Nova-13-Pro-Original-Speaker-Ringer-Buzzer.htm Thu, 06 Nov 2025 18:40:01 GMT 4070595
1. Loudspeaker replacement part.
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Completely fit and work.
5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. ]]> https://www.sunsky-online.com/p/EDA005788524/For-Huawei-Nova-13-Original-Speaker-Ringer-Buzzer.htm Thu, 06 Nov 2025 18:40:01 GMT 4070596
1. Loudspeaker replacement part.
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Completely fit and work.
5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. ]]> https://www.sunsky-online.com/p/EDA005788730/For-Honor-Play-60-Original-Speaker-Ringer-Buzzer.htm Thu, 06 Nov 2025 18:45:57 GMT 4070598
1. Loudspeaker replacement part.
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Completely fit and work.
5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. ]]> https://www.sunsky-online.com/p/DCA4285H/For-Insta360-GO-Ultra-Sunnylife-Magnetic-Mount-Tabletop-Base-Bracket-Grey-.htm Thu, 06 Nov 2025 18:48:27 GMT 4070584
Features:
1. Strong Magnetic Adsorption. Built-in high-strength magnets ensure quick and convenient installation.
2. Vertical-Horizontal Mount. Mount both vertically and horizontally to capture more footage.
3. Multifunctional Magnetic Mount & Adjustable Tabletop Mount.
4. Freely Adjust Angles. You can freely adjust the mount and camera to the shooting angle you like.
5. Foldable & Portable. The camera mount is mini and portable after folded.

Specifications:
1. Name: Sunnylife Magnetic Mount
2. Model???GU-DZ048
3. Applicable models: For Insta360 GO Ultra
4. Material: Plastic + Magnet + Silicone
5. Net weight: 36g

]]> https://www.sunsky-online.com/p/EDA007137818A/For-Honor-Magic8-Pro-Rotating-Holder-Frosted-Metal-Phone-Case-Black-.htm Thu, 06 Nov 2025 18:49:49 GMT 4070663
1. Durable Material: Made of TPU and metal material, strong and durable.
2. Fully Protection: Fully protects equipment from normal scratches, dirt, tears and wear.
3. Stand Function: 360 degree rotation magnetic holder allows you to free your hands when reading or watching movies and improve work efficiency.
4. Precise Cutouts: Precise cut-outs and openings, with easy access to all features, ports and buttons.
5. Simple Design: The shape is simple, leaving a pure and comfortable impression to everyone.

Note: The real object is subject to the title model, and the picture model is for reference only. ]]> https://www.sunsky-online.com/p/EDA007137606A/For-Redmi-K90-Pro-Max-Rotating-Holder-Frosted-Metal-Phone-Case-Black-.htm Thu, 06 Nov 2025 18:58:57 GMT 4070657
1. Durable Material: Made of TPU and metal material, strong and durable.
2. Fully Protection: Fully protects equipment from normal scratches, dirt, tears and wear.
3. Stand Function: 360 degree rotation magnetic holder allows you to free your hands when reading or watching movies and improve work efficiency.
4. Precise Cutouts: Precise cut-outs and openings, with easy access to all features, ports and buttons.
5. Simple Design: The shape is simple, leaving a pure and comfortable impression to everyone.

Note: The real object is subject to the title model, and the picture model is for reference only. ]]> https://www.sunsky-online.com/p/EDA008784301/MIJING-Toughened-Insulated-Glass-Fixture-Model-GK21.htm Thu, 06 Nov 2025 19:04:07 GMT 4070716
1. A variety of fixing methods so that the chip can be handled with ease
2. High temperature resistant tempered glass/Multifunctional fixed sliding block/Quick-lock screw/Thickened alloy base/Non-slip silicone nut
3. Two-way 4 movable card block, precisely adapted to various types of motherboards
4. The V-shaped and beveled double slots are firmly clamped so that every maintenance can be completed perfectly
5. High-temperature resistant glass panel, easy-to-clean panel ]]> https://www.sunsky-online.com/p/EDA007379202A/For-AirPods-Pro-3-Non-slip-Armor-Shockproof-Earphones-Case-with-Hook-Black-.htm Thu, 06 Nov 2025 19:15:07 GMT 4070666
1. Protect the headset 360 degrees.
2. Fashionable, beautiful and durable.
3. The hole position is accurate.
4. The charging port is reserved, so there is no need to remove the earphone sleeve when charging.
5. Small size and light weight.
6. Personalized design, fashionable and beautiful.

Note: There is only a protective case in the package, not headphones. ]]> https://www.sunsky-online.com/p/EDA007380602A/For-AirPods-Pro-3-Non-slip-TPU-PC-Shockproof-Earphones-Case-with-Hook-Blue-.htm Thu, 06 Nov 2025 19:22:17 GMT 4070674
1. Protect the headset 360 degrees.
2. Fashionable, beautiful and durable.
3. The hole position is accurate.
4. The charging port is reserved, so there is no need to remove the earphone sleeve when charging.
5. Small size and light weight.
6. Personalized design, fashionable and beautiful.

Note: There is only a protective case in the package, not headphones. ]]> https://www.sunsky-online.com/p/DOP2578B/For-DJI-Osmo-360-Sunnylife-Dual-Direction-Magnetic-Quick-Release-Adapter-Mount-Black-.htm Thu, 06 Nov 2025 19:46:33 GMT 4070585
Features:
1. The dual-direction magnetic mount helps mounting or dismounting your cam in seconds.
2. 180 degree tilt to adjust angles freely.
3. CNC Processed Aluminum Alloy 2-prong. The aluminum alloy two prongs guarantee close and safe installation.
4. 1/4 in screw adapter is compatible with selfie stick, tripod and other 1/4 in adapters.

Specifications:
1. Model: ON-AD109
2. Compatible models: For Osmo Nano
3. Material: Plastic+ Aluminum Alloy + Magnet + Silicone
4. Net Weight: 17g

]]> https://www.sunsky-online.com/p/DOP3487B/For-DJI-Osmo-360-Sunnylife-Silicone-Lens-Cover-Scratch-Proof-Camera-Cover-Protector-Black-.htm Thu, 06 Nov 2025 19:52:11 GMT 4070586
Features:
1. Compatible with Osmo Nano.
2. Scratch-proof, dust-proof and durable. Prevent lens from accidental bumps and scratches.
3. Non-slip Design. Prevent hand slip and easy wearing.
4. The silicone cover is elegant and protective, while donot influence usage at all.
5. Portable, easy to carry.

Specifications:
1. Name: Sunnylife Silicone Lens Protector
2. Model: ON-SG116
3. Applicable models: For Osmo Nano
4. Material: Silicone
5. Net weight: 2g

]]> https://www.sunsky-online.com/p/EDA007925837A/For-vivo-Y31-5G-2025-Y21d-4G-Cubic-Grid-Texture-Flip-Leather-Phone-Case-Black-.htm Thu, 06 Nov 2025 20:30:02 GMT 4070682
1. Durable: TPU + PU leather material, wear-resistant and durable for long-term use.
2. Convenient: Precise cutouts and openings allow easy access to all functions, ports and buttons.
3. Protection: Fully protect the device from normal scratches, dirt, tears and wear.
4. Wallet Function: The leather case is equipped with card slots and compartments for cards and small amounts of cash.
5. Kickstand Function: The kickstand can be switched to a horizontal position and acted as a firm stand. Gives your phone a comfortable viewing angle.

Note: The actual product is subject to the title model, and the model machine in the picture is for reference only. ]]> https://www.sunsky-online.com/p/DOP4713H/For-DJI-Neo-2-STARTRC-PU-Shoulder-Storage-Bag-Drone-Body-Handbag-Grey-.htm Thu, 06 Nov 2025 20:40:02 GMT 4070587
1. A dedicated carrying case designed specifically for the DJI Neo 2, precisely fitting the drone and batteries for perfect storage and everyday use. It can hold up to three batteries, including the drone.
2. The exterior is made of high-quality PU material, while the interior is lined with double-layer Lycra fabric, providing comprehensive protection for your drone and batteries. It is splash-proof, sun-proof, dustproof, and durable.
3. The one-piece molded design ensures precise storage and prevents equipment from shifting during transport, providing shock absorption. The raised design on the inner lid reduces friction between the equipment and the lid, offering double protection during transport.
4. Small handles along the edge make it easy to carry, and a matching shoulder strap allows for crossbody wear. Its compact design makes it suitable for backpacks and luggage, ideal for everyday casual outings and outdoor shooting.
5. The double-zipper design ensures smooth, non-jamming operation, making it easy to open and close the storage bag and easily access your devices.

Note: This NEO2 model features modular storage; the top mesh pocket displays data cables and charging cables, but avoid displaying anything protruding.

]]> https://www.sunsky-online.com/p/EDA008652415A/For-Samsung-Galaxy-S25-Edge-5G-Twill-Fabric-MagSafe-RFID-Anti-theft-Zipper-Wallet-Leather-Phone-Case-Black-.htm Thu, 06 Nov 2025 22:14:18 GMT 4070816
null ]]> https://www.sunsky-online.com/p/EDA008784602A/For-Honor-400-Lite-Global-Twill-Fabric-MagSafe-RFID-Anti-theft-Zipper-Wallet-Leather-Phone-Case-Black-.htm Thu, 06 Nov 2025 22:40:18 GMT 4070890
1. Durable: TPU and PU leather material, wear-resistant and durable. With good performance and high quality can be used for a long time.
2. Zipper Wallet Function: The leather case is equipped with zipper wallet and card slots for placing cards and a small amount of cash.
3. RFID Blocking: Prevents others from maliciously reading and stealing your personal information.
4. Kickstand Function: The kickstand can be switched to a horizontal position and acted as a firm stand. Gives your phone a comfortable viewing angle.
5. Protection: It adequately protects devices from the normal scratches, dirt, tear and wear.
6. Support MagSafe: Built-in magnets are suitable for wireless charging of mobile phones, providing a magical connection and removal experience every time.
7. Convenience: All buttons and ports can be accessed, charged, and connected to the headphone cable without removing the phone case. ]]> https://www.sunsky-online.com/p/EDA008784502A/For-Huawei-Pura-80-Pro-80-Pro-5G-Twill-Fabric-MagSafe-RFID-Anti-theft-Zipper-Wallet-Leather-Phone-Case-Black-.htm Thu, 06 Nov 2025 22:40:59 GMT 4070886
1. Durable: TPU and PU leather material, wear-resistant and durable. With good performance and high quality can be used for a long time.
2. Zipper Wallet Function: The leather case is equipped with zipper wallet and card slots for placing cards and a small amount of cash.
3. RFID Blocking: Prevents others from maliciously reading and stealing your personal information.
4. Kickstand Function: The kickstand can be switched to a horizontal position and acted as a firm stand. Gives your phone a comfortable viewing angle.
5. Protection: It adequately protects devices from the normal scratches, dirt, tear and wear.
6. Support MagSafe: Built-in magnets are suitable for wireless charging of mobile phones, providing a magical connection and removal experience every time.
7. Convenience: All buttons and ports can be accessed, charged, and connected to the headphone cable without removing the phone case. ]]> https://www.sunsky-online.com/p/EDA008784715A/For-Motorola-Edge-60-Pro-Twill-Fabric-MagSafe-RFID-Anti-theft-Zipper-Wallet-Leather-Phone-Case-Black-.htm Thu, 06 Nov 2025 23:07:58 GMT 4070922
1. Durable: TPU and PU leather material, wear-resistant and durable. With good performance and high quality can be used for a long time.
2. Zipper Wallet Function: The leather case is equipped with zipper wallet and card slots for placing cards and a small amount of cash.
3. RFID Blocking: Prevents others from maliciously reading and stealing your personal information.
4. Kickstand Function: The kickstand can be switched to a horizontal position and acted as a firm stand. Gives your phone a comfortable viewing angle.
5. Protection: It adequately protects devices from the normal scratches, dirt, tear and wear.
6. Support MagSafe: Built-in magnets are suitable for wireless charging of mobile phones, providing a magical connection and removal experience every time.
7. Convenience: All buttons and ports can be accessed, charged, and connected to the headphone cable without removing the phone case. ]]> https://www.sunsky-online.com/p/TBD0606423301A/5pcs-Pack-High-Temperature-Resistant-Nylon-Desoldering-Nozzle-17mm-Heatproof-Solder-Suction-Tip-White-.htm Fri, 07 Nov 2025 09:24:57 GMT 4071376

1. Specially designed for 17mm nozzle diameter desoldering pumps, made of nylon material, providing high-temperature protection during desoldering operations.
2. Compatible with mainstream 17mm nozzle desoldering equipment such as Hakko 017/FX888.
3. High temperature resistant, oxidation resistant, long service life.
4. Weight: Approx. 3g/piece.
5. Note: Product includes only the nozzle tip, does not include the manual desoldering pump. ]]> https://www.sunsky-online.com/p/TBD0606423501A/9pcs-Set-18W-Electric-Foam-Plastic-Heated-Cutting-Machine-US-Plug-.htm Fri, 07 Nov 2025 09:33:57 GMT 4071379

1. Material: stainless steel
2. Heating tube diameter: 2mm
3. Short straight heating head: 12cm
4. Long straight heating head: 7cm
5. Curved heating head: 5cm
6. Replaceable heating wire: 10m
7. Bow-shaped cutter: 18cm
8. Working power: 0-27W Adjustable
9. Input power: 100-240V AC
10. Output: 9V/3A
11. Made of high-quality stainless steel for longer service life
12. Clean and smooth cut, rapid heating; the tube reaches 150 degrees Celsius in 10-15 seconds, easily cutting polystyrene foam with clean, sealed edges, leaving no debris.
13. Can cut foam boards or blocks into desired shapes from any angle.
14. Makes it easier for users to create advertising slogans, art models, and various foam cutting shapes.
15. Maintenance recommendations: before use, preheat one nozzle. Allow it to rest after 30 minutes of continuous operation. After cooling, wipe the heating needle with a damp sponge to prevent blackening and hardening due to oxide adhesion.

Package list:
- Cutting machine x 1
- Short straight heating head x 1
- Long straight heating head x 1
- Curved heating head
- Bow-shaped heating head x 1
- Cutting machine stand x 1
- Temperature control adapter x 1
- 10-meter heating wire x 1
- Doctor blade x 1
- English instruction manual x 1 ]]> https://www.sunsky-online.com/p/EDA008718224A/For-Huawei-nova-14-Lite-Trigger-Design-Hollow-Metal-Frame-Phone-Case-with-Lanyard-Black-.htm Fri, 07 Nov 2025 09:52:25 GMT 4070825
1. Metal material, precision processing, spliced by screws and detachable.
2. The hollow back panel greatly increases the heat dissipation area and prevents the phone from getting hot after long-term use.
3. Four corner reinforced structure, embedded with highly elastic polymer, effectively resisting impact.
4. A carabiner and wrist strap make it easy to carry your phone.
5. Made of aluminum alloy, durable and lightweight. The weight of metal case approx. 55-70 grams.
6. Smooth edges and corners, no scratches, good hand feeling.
7. The appearance is a fusion of Gothic Style, Metal Rock, Steampunk Style, Pop art and other genres, with multiple aesthetics but not vulgar.

Note: The actual product is subject to the title model, the model machine in the picture is only for reference. ]]> https://www.sunsky-online.com/p/EDA008718013A/For-vivo-X300-Pro-Trigger-Design-Hollow-Metal-Frame-Phone-Case-with-Lanyard-Black-.htm Fri, 07 Nov 2025 09:58:50 GMT 4070821
1. Metal material, precision processing, spliced by screws and detachable.
2. The hollow back panel greatly increases the heat dissipation area and prevents the phone from getting hot after long-term use.
3. Four corner reinforced structure, embedded with highly elastic polymer, effectively resisting impact.
4. A carabiner and wrist strap make it easy to carry your phone.
5. Made of aluminum alloy, durable and lightweight. The weight of metal case approx. 55-70 grams.
6. Smooth edges and corners, no scratches, good hand feeling.
7. The appearance is a fusion of Gothic Style, Metal Rock, Steampunk Style, Pop art and other genres, with multiple aesthetics but not vulgar.

Note: The actual product is subject to the title model, the model machine in the picture is only for reference. ]]> https://www.sunsky-online.com/p/EDA008721321A/For-Redmi-K90-Trigger-Design-Hollow-Metal-Frame-Phone-Case-with-Lanyard-Black-.htm Fri, 07 Nov 2025 10:01:45 GMT 4070841
1. Metal material, precision processing, spliced by screws and detachable.
2. The hollow back panel greatly increases the heat dissipation area and prevents the phone from getting hot after long-term use.
3. Four corner reinforced structure, embedded with highly elastic polymer, effectively resisting impact.
4. A carabiner and wrist strap make it easy to carry your phone.
5. Made of aluminum alloy, durable and lightweight. The weight of metal case approx. 55-70 grams.
6. Smooth edges and corners, no scratches, good hand feeling.
7. The appearance is a fusion of Gothic Style, Metal Rock, Steampunk Style, Pop art and other genres, with multiple aesthetics but not vulgar.

Note: The actual product is subject to the title model, the model machine in the picture is only for reference. ]]> https://www.sunsky-online.com/p/EDA008720722A/For-Motorola-Edge-70-5G-Trigger-Design-Hollow-Metal-Frame-Phone-Case-with-Lanyard-Black-.htm Fri, 07 Nov 2025 10:03:26 GMT 4070839
1. Metal material, precision processing, spliced by screws and detachable.
2. The hollow back panel greatly increases the heat dissipation area and prevents the phone from getting hot after long-term use.
3. Four corner reinforced structure, embedded with highly elastic polymer, effectively resisting impact.
4. A carabiner and wrist strap make it easy to carry your phone.
5. Made of aluminum alloy, durable and lightweight. The weight of metal case approx. 55-70 grams.
6. Smooth edges and corners, no scratches, good hand feeling.
7. The appearance is a fusion of Gothic Style, Metal Rock, Steampunk Style, Pop art and other genres, with multiple aesthetics but not vulgar.

Note: The actual product is subject to the title model, the model machine in the picture is only for reference. ]]> https://www.sunsky-online.com/p/EDA008719126A/For-Honor-Magic8-Pro-Trigger-Design-Hollow-Metal-Frame-Phone-Case-with-Lanyard-Black-.htm Fri, 07 Nov 2025 10:05:41 GMT 4070833
1. Metal material, precision processing, spliced by screws and detachable.
2. The hollow back panel greatly increases the heat dissipation area and prevents the phone from getting hot after long-term use.
3. Four corner reinforced structure, embedded with highly elastic polymer, effectively resisting impact.
4. A carabiner and wrist strap make it easy to carry your phone.
5. Made of aluminum alloy, durable and lightweight. The weight of metal case approx. 55-70 grams.
6. Smooth edges and corners, no scratches, good hand feeling.
7. The appearance is a fusion of Gothic Style, Metal Rock, Steampunk Style, Pop art and other genres, with multiple aesthetics but not vulgar.

Note: The actual product is subject to the title model, the model machine in the picture is only for reference. ]]> https://www.sunsky-online.com/p/EDA008719334A/For-Realme-P4-Pro-Trigger-Design-Hollow-Metal-Frame-Phone-Case-with-Lanyard-Black-.htm Fri, 07 Nov 2025 10:11:00 GMT 4070837
1. Metal material, precision processing, spliced by screws and detachable.
2. The hollow back panel greatly increases the heat dissipation area and prevents the phone from getting hot after long-term use.
3. Four corner reinforced structure, embedded with highly elastic polymer, effectively resisting impact.
4. A carabiner and wrist strap make it easy to carry your phone.
5. Made of aluminum alloy, durable and lightweight. The weight of metal case approx. 55-70 grams.
6. Smooth edges and corners, no scratches, good hand feeling.
7. The appearance is a fusion of Gothic Style, Metal Rock, Steampunk Style, Pop art and other genres, with multiple aesthetics but not vulgar.

Note: The actual product is subject to the title model, the model machine in the picture is only for reference. ]]> https://www.sunsky-online.com/p/EDA008731321A/For-Honor-Magic8-Pro-Rotating-Bracket-Hollow-Metal-Phone-Case-with-Lanyard-Black-.htm Fri, 07 Nov 2025 10:16:48 GMT 4070853
1. Metal material, precision processing, spliced by screws and detachable.
2. The hollow back panel greatly increases the heat dissipation area and prevents the phone from getting hot after long-term use.
3. Four corner reinforced structure, embedded with highly elastic polymer, effectively resisting impact.
4. 360 degree rotating ring holder provides stable support for the phone.
5. Made of aluminum alloy, durable and lightweight.
6. Smooth edges and corners, no scratches, good hand feeling.
7. The appearance is a fusion of Gothic Style, Metal Rock, Steampunk Style, Pop art and other genres, with multiple aesthetics but not vulgar. ]]> https://www.sunsky-online.com/p/EDA008728834A/For-vivo-X300-Pro-Rotating-Bracket-Hollow-Metal-Phone-Case-with-Lanyard-Black-.htm Fri, 07 Nov 2025 10:19:30 GMT 4070845
1. Metal material, precision processing, spliced by screws and detachable.
2. The hollow back panel greatly increases the heat dissipation area and prevents the phone from getting hot after long-term use.
3. Four corner reinforced structure, embedded with highly elastic polymer, effectively resisting impact.
4. 360 degree rotating ring holder provides stable support for the phone.
5. Made of aluminum alloy, durable and lightweight.
6. Smooth edges and corners, no scratches, good hand feeling.
7. The appearance is a fusion of Gothic Style, Metal Rock, Steampunk Style, Pop art and other genres, with multiple aesthetics but not vulgar. ]]> https://www.sunsky-online.com/p/TBD0606423601/Travel-H-shaped-Inflatable-Pillow-Car-Long-distance-Airplane-Nap-Neck-Pillow-Color-With-Hat-Navy.htm Fri, 07 Nov 2025 10:20:48 GMT 4071381

1. 4cm large caliber, save time and effort, fast blowing and deflation
2. Removable and washable cloth cover, clean and hygienic, inflatable inner liner does not need to be cleaned, usually regularly remove the jacket to clean the pillowcase can be
3. Hoodie lock buckle, easy to adjust
4. With drawstring storage bag, easy to organize the neck pillow, can be put into the luggage or backpack at will
5. Snap button design, environmentally friendly materials, press smooth and effortless
6. Hidden zipper, beautiful and comfortable
7. Material: PVC + crystal velvet cover
8. Size: about 32 x 21 x 10cm
9. Weight: about 217g ]]> https://www.sunsky-online.com/p/EDA007665205A/For-AirPods-Pro-3-Mirror-Stand-Silicone-Earphones-Protective-Case-Blue-.htm Fri, 07 Nov 2025 10:21:33 GMT 4070750
1. Stain-Resistant and Durable: The scratch-resistant surface is easy to clean, keeping the case looking good over time.
2. Comprehensive Protection: Protect your headphones from dust, scratches and external impacts.
3. Convenient charging: A charging port is reserved to charge the earphones without removing the protective cover.
4. Available in various colors to meet your personalized needs, giving your earphones a fresh new look.
5. Multi-Functional Design: Integrates a makeup mirror and phone stand, offering more practical features.
6. This product has only one protective case, earphones are not included.

Note: There is only a protective case in the package, not headphones. ]]> https://www.sunsky-online.com/p/EDA008785801A/Y-type-Balanced-Microphone-Splitter-XLR-Audio-Cable-Length-0.5m-Specification-Female-Elbow-to-2xMale-Elbow-Black-.htm Fri, 07 Nov 2025 10:24:07 GMT 4070970
1. Material: Pure copper metal
2. Clear sound quality, no noise, grounded design effectively shields against noise interference, resulting in a clean and delicate sound.
3. High-fidelity sound reproduction, supports multiple devices, sturdy and durable, secure connection, not easily loosened.
4. Suitable for microphones, wireless microphones, PA mixing consoles, DAC mixing consoles, guitar amplifiers, or other professional audio equipment with XLR connectors.
5. Applicable to various scenarios, suitable for studios, recording studios, concerts, karaoke, home theaters, public address systems, and more. ]]> https://www.sunsky-online.com/p/EDA008729910A/For-ZTE-nubia-RedMagic-11-Pro-Rotating-Bracket-Hollow-Metal-Phone-Case-with-Lanyard-Black-.htm Fri, 07 Nov 2025 10:24:52 GMT 4070847
1. Metal material, precision processing, spliced by screws and detachable.
2. The hollow back panel greatly increases the heat dissipation area and prevents the phone from getting hot after long-term use.
3. Four corner reinforced structure, embedded with highly elastic polymer, effectively resisting impact.
4. 360 degree rotating ring holder provides stable support for the phone.
5. Made of aluminum alloy, durable and lightweight.
6. Smooth edges and corners, no scratches, good hand feeling.
7. The appearance is a fusion of Gothic Style, Metal Rock, Steampunk Style, Pop art and other genres, with multiple aesthetics but not vulgar. ]]> https://www.sunsky-online.com/p/TBD0606422301/Infrared-Remote-Control-Version-Magnetic-360-degree-Rotating-Rechargeable-Wall-Light-Night-Light-for-Cabinets-Closet-Hallway-1200mAh.htm Fri, 07 Nov 2025 10:33:57 GMT 4071372

1. Magnetic Wall-Mounted Bedside Lamp (2 Versions: Infrared Remote & Human Motion Sensor): A revolutionary space-saving lighting solution combining magnetic installation, 360-degree rotating, and intelligent controls.
2. Dual Control Options:
--Remote Control Version: 3-step color temperature adjustment (3000K/4000K/6000K) via infrared remote
--Motion Sensor Version: Auto-activation within 3m/100-degree detection range, 25-second auto-off after motion disappears
3. Installs in 15 seconds using ultra-strong magnets and non-marking adhesive stickers (included). Leaves desktop space completely free.
4. Touch-controlled stepless dimming, built-in lithium battery provides long-lasting stable lighting.
5. Light reflector cup + frosted transparent lampshade for wider, brighter, and more three-dimensional light.
6. Detachable lamp head enables effortless USB-C charging without removing the base.
7. Intelligent memory function remembers your lighting habits.

Specifications:
1. Power: 1.2W
2. Battery Capacity: 1200mAh/4000mAh (Battery life reference: approximately 5 hours at maximum brightness with 1200mAh)
3. Charging Interface: Type-C
4. Product Dimensions: 81 x 42 x 105mm ]]> https://www.sunsky-online.com/p/EDA007381102A/For-AirPods-Pro-3-TPU-PC-Shockproof-Earphones-Case-with-Hook-Black-.htm Fri, 07 Nov 2025 10:35:53 GMT 4070740
1. Protect the headset 360 degrees.
2. Fashionable, beautiful and durable.
3. The hole position is accurate.
4. The charging port is reserved, so there is no need to remove the earphone sleeve when charging.
5. Small size and light weight.
6. Personalized design, fashionable and beautiful.

Note: There is only a protective case in the package, not headphones. ]]> https://www.sunsky-online.com/p/EDA004853029A/For-iPhone-17-Pro-Max-Electroplating-Meteorite-Texture-TPU-Phone-Case-Black-.htm Fri, 07 Nov 2025 10:48:36 GMT 4070722
1. Material: Made of soft TPU material, wear-resistant and scratch-resistant. durable, it can work for a long time.
2. Full Protection: It fully protects the equipment from general scratches, dirt and abrasion.
3. Lightweght And Easy Use: Compact, light-weight,easy to install and remove.
4. Cool Design: Electroplating meteorite texture mirror design makes the case full of passion.
5. Precise Cut-Out: Precise cut-outs and openings, with easy access to all features, ports and buttons.

Note: The actual product is subject to the title model, and the picture model is for reference only. ]]> https://www.sunsky-online.com/p/TBD0606423901/Angle-Grinder-Polishing-Adapter-Universal-Head-For-100-115-125-Models-Specification-M10.htm Fri, 07 Nov 2025 11:06:17 GMT 4071388

1. Material: steel; fine sandpaper
2. Universal accessory interface design, easy accessory switching, compatible with mainstream accessory specifications on the market, suitable for various work scenarios
3. Suitable for coarse grinding and shaping of fillers, tile adhesives, concrete, and soft stone
4. Narrow safety blade is ideal for detailed work in corners and confined spaces
5. Can be used to cut the thinnest mortar, plaster walls, cement boards, mortar, trim cement, etc.
6. Made of high-hardness, low-temperature resistant, and high-temperature resistant metal accessories
7. Reciprocating saw oscillating cutting principle, safe operation and reliable cutting
8. Sandpaper length: 9 cm / 3.54 inches

Package contents:
- Universal head x 1
- High carbon steel saw blade x 1
- Precision saw blade x 1
- Eccentric shaft x 1
- Hex nut x 1
- Triangular sanding disc x 2
- Sandpaper x 2
- Screws x 2
- Wrench x 3 ]]> https://www.sunsky-online.com/p/EDA008786401A/For-iPhone-17-Pro-Max-TOTU-PC-17-Vegan-Leather-MagSafe-Magnetic-Phone-Case-White-.htm Fri, 07 Nov 2025 11:17:57 GMT 4070975
1. Made of leather and PC material, wear-resistant and durable.
2. Supports MagSafe magnetic charging; simply place the device to charge for easy use.
3. Skin-friendly vegan leather feel, fully protecting the device from normal scratches, dirt, tears, and wear.
4. All buttons and ports are easy to use.
5. High-strength PC back panel, scratch-resistant and wear-resistant.

Note: The actual product is subject to the model number in the title; the model number in the image is for reference only. ]]> https://www.sunsky-online.com/p/EDA008785202A/For-iPhone-17-Pro-Max-Do-As-You-Wish-HD-Tempered-Glass-Film-Transparent-.htm Fri, 07 Nov 2025 11:35:09 GMT 4070950
1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film,you need to do is clean up the screen thoroughly.
7. Durable. With good performance and quality, it can work for a long time.

Installation instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product. ]]> https://www.sunsky-online.com/p/EDA008786601A/WK-WDC-C11-QIN-Series-1m-65W-Type-C-to-Type-C-Magnetic-Silicone-Fast-Charging-Data-Cable-Pink-.htm Fri, 07 Nov 2025 11:35:17 GMT 4070988
1. Innovative magnetic cable design, no mess, no tangles.
2. PD 65W high-power output.
3. 600GS magnetic force for ultra-strong hold.
4. Auto-retracting for neat storage, say goodbye to clutter.
5. Freely extendable length to meet diverse charging needs.

Specifications
1. Cable Length: 1m
2. Interface: Type-C to Type-C
3. Material: silicone
4. Output: 66W
5. Data Transfer: 480Mbps
6. Weight: 48.2g ]]> https://www.sunsky-online.com/p/EDA008786901A/For-iPhone-17-Pro-Max-Cream-Texture-Electroplating-TPU-Full-Coverage-Phone-Case-Orange-.htm Fri, 07 Nov 2025 11:35:28 GMT 4070990
1. The raised border around the screen and the raised border around the camera help to reduce the chance of damage to the screen in daily use.
2. The shape is simple, leaving a pure and comfortable impression on everyone.
3. Adequately protect the device from normal scratches, dirt, tear and wear.
4. All buttons and ports are easy to access.
5. Cream texture design makes your phone look brand new.
6. 360-degree protection, buffer corners protect your phone from drops and shocks.

Note: The actual product is subject to the title model, the model machine of the picture is only for effect reference. ]]> https://www.sunsky-online.com/p/EDA008787001A/For-iPhone-17-Pro-Max-17-Pro-TOTU-PG-3-Matte-Aluminum-Alloy-Lens-Protective-Film-Orange-.htm Fri, 07 Nov 2025 11:38:07 GMT 4071335
1. Material: CSG glass + aluminum alloy
2. Explosion-proof film inside, safer and more resistant to falling
3. Fine frosting, no oil stains
4. Frosted metal frame, high-end texture
5. 9H hardness, scratch-resistant and wear-resistant
6. Installation and disassembly, simple and convenient ]]> https://www.sunsky-online.com/p/EDA008785102A/For-iPhone-17-Pro-Max-5pcs-Pack-Do-As-You-Wish-HD-Tempered-Glass-Film-Transparent-.htm Fri, 07 Nov 2025 11:40:28 GMT 4070930
1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film,you need to do is clean up the screen thoroughly.
7. Durable. With good performance and quality, it can work for a long time.

Installation instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product. ]]> https://www.sunsky-online.com/p/EDA008782401A/For-Google-Pixel-8-Pro-Do-As-You-Wish-HD-Tempered-Glass-Film-Transparent-.htm Fri, 07 Nov 2025 11:42:58 GMT 4070857
1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film,you need to do is clean up the screen thoroughly.
7. Durable. With good performance and quality, it can work for a long time.

Installation instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product. ]]> https://www.sunsky-online.com/p/EDA008782301A/For-Google-Pixel-8-Pro-5pcs-Pack-Do-As-You-Wish-HD-Tempered-Glass-Film-Transparent-.htm Fri, 07 Nov 2025 11:43:07 GMT 4070855
1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film,you need to do is clean up the screen thoroughly.
7. Durable. With good performance and quality, it can work for a long time.

Installation instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product. ]]> https://www.sunsky-online.com/p/TBD0606424201A/TRAELSKY-Flocking-PVC-Inflatable-Footstool-Airplane-Train-Car-Footrest-Office-Nap-Footrest-With-Inflatable-Bag-Spec-2-Layer-Gray-.htm Fri, 07 Nov 2025 11:44:07 GMT 4071390

1. Ergonomic, elevated legs to avoid soreness and pain
2. Heat-pressing process, stronger load-bearing, load-bearing up to 100kg, can be directly used as an inflatable stool
3. 4cm large caliber, fast blowing and deflating, a light press can deflate
4. Folding and easy to store, convenient to carry
5. Applicable to a variety of scenes, suitable for sedentary people
6. Washing mode: wet towel wipe
7. Material: PVC flocking, polyester + TPU composite
8. Size: 2 layers about 40 x 30 x 32cm, 3 layers about 40 x 30 x 44cm, inflatable bag about 60 x 33cm
9. Weight: 2 layers about 360g, 3 layers about 480g, double valve adjustable models about 540g ]]> https://www.sunsky-online.com/p/EDA008787101A/For-iPhone-17-TOTU-PG-3-Matte-Aluminum-Alloy-Lens-Protective-Film-Blue-.htm Fri, 07 Nov 2025 11:44:19 GMT 4071339
1. Material: CSG glass + aluminum alloy
2. Explosion-proof film inside, safer and more resistant to falling
3. Fine frosting, no oil stains
4. Frosted metal frame, high-end texture
5. 9H hardness, scratch-resistant and wear-resistant
6. Installation and disassembly, simple and convenient ]]> https://www.sunsky-online.com/p/EDA008787201A/For-Fitbit-Flex-2-xDfind-Translucent-Film-Metal-Buckle-Silicone-Watch-Band-Size-S-White-.htm Fri, 07 Nov 2025 11:48:40 GMT 4071344
1. Material: Silicone
2. Easy to install, comfortable to wear
3. Easy to replace, will not cause damage to the watch
4. The strap length is easy to adjust to fit your wrist
5. Fashionable and beautiful, giving you a different visual experience

Note: The actual product is subject to the title model, and the model in the picture is for reference only. ]]> https://www.sunsky-online.com/p/EDA008787301A/For-iPhone-Air-TOTU-PG-3-Matte-Aluminum-Alloy-Lens-Protective-Film-Black-.htm Fri, 07 Nov 2025 11:50:14 GMT 4071368
1. Material: CSG glass + aluminum alloy
2. Explosion-proof film inside, safer and more resistant to falling
3. Fine frosting, no oil stains
4. Frosted metal frame, high-end texture
5. 9H hardness, scratch-resistant and wear-resistant
6. Installation and disassembly, simple and convenient ]]> https://www.sunsky-online.com/p/EDA007901207/For-vivo-X300-Pro-IMAK-Rear-Camera-Lens-Glass-Film-Thin-Version.htm Fri, 07 Nov 2025 11:50:23 GMT 4070757
1. Hard and durable surface under special manufacturing process.
2. Static technology eliminates the bubble effect and enhance firmly on the camera lens.
3. Easily remove without any adhesive.
4. High transparency with high clarity.
5. Scratching protect on the camera. ]]> https://www.sunsky-online.com/p/EDA008782602A/For-ZTE-nubia-RedMagic-10-Pro-Do-As-You-Wish-HD-Tempered-Glass-Film-Transparent-.htm Fri, 07 Nov 2025 11:51:01 GMT 4070864
1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film,you need to do is clean up the screen thoroughly.
7. Durable. With good performance and quality, it can work for a long time.

Installation instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product. ]]> https://www.sunsky-online.com/p/EDA008782502A/For-ZTE-nubia-RedMagic-10-Pro-5pcs-Pack-Do-As-You-Wish-HD-Tempered-Glass-Film-Transparent-.htm Fri, 07 Nov 2025 11:51:17 GMT 4070860
1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film,you need to do is clean up the screen thoroughly.
7. Durable. With good performance and quality, it can work for a long time.

Installation instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product. ]]> https://www.sunsky-online.com/p/EDA008782803A/For-Meizu-Note-21-Do-As-You-Wish-HD-Tempered-Glass-Film-Transparent-.htm Fri, 07 Nov 2025 11:53:17 GMT 4070869
1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film,you need to do is clean up the screen thoroughly.
7. Durable. With good performance and quality, it can work for a long time.

Installation instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product. ]]> https://www.sunsky-online.com/p/EDA008785003A/For-Meizu-Note-21-5pcs-Pack-Do-As-You-Wish-HD-Tempered-Glass-Film-Transparent-.htm Fri, 07 Nov 2025 11:53:30 GMT 4070928
1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film,you need to do is clean up the screen thoroughly.
7. Durable. With good performance and quality, it can work for a long time.

Installation instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product. ]]> https://www.sunsky-online.com/p/EDA008783004A/For-OnePlus-Ace-3V-Do-As-You-Wish-HD-Tempered-Glass-Film-Transparent-.htm Fri, 07 Nov 2025 11:59:47 GMT 4070880
1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film,you need to do is clean up the screen thoroughly.
7. Durable. With good performance and quality, it can work for a long time.

Installation instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product. ]]> https://www.sunsky-online.com/p/EDA008782904A/For-OnePlus-Ace-3V-5pcs-Pack-Do-As-You-Wish-HD-Tempered-Glass-Film-Transparent-.htm Fri, 07 Nov 2025 11:59:57 GMT 4070873
1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film,you need to do is clean up the screen thoroughly.
7. Durable. With good performance and quality, it can work for a long time.

Installation instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product. ]]>