产品类别
批发: $119.23
一箱10个: $1204.20 $1180.40
在App中购买

扫描产品的二维码直接购买。

按照以下步骤操作:

1.转到Google和Apple市场下载安装应用

2.打开SUNSKY App并扫描左侧二维码

SUNSKY APP
   ≥ 1 个 $120.42  
   ≥ 2 个 $119.23  
   ≥ 1/2 箱 $118.63  
   ≥ 1 箱 $118.04  
   ≥ 4 箱 $117.44  
   ≥ 10 箱 $116.85  
同款产品  
批量购买
添加到购物车
立即购买
国家/地区:
运费:   运输方式:
其它方式
快递 运费 运输时间
Avatar
销售经理: Ms. Melissa
+86-13418739500
我们一直努力做到低价和好的品质,并承诺保价和退换货服务。
查看售后条款
IP6S5013WT
  • IP6S5013WT
  • IP6S5013WT
  • IP6S5013WT
  • IP6S5013WT
  • IP6S5013WT
  • IP6S5013WT
  • IP6S5013WT
产品型号: IP6S5013WT
Click Count 2260 点击次数

特色产品

维修配件

最近浏览

免费礼物 (礼品将和当前产品一起发送)

描述

安装前注意事项
1. 安装前 
测试时,请勿取下任何保护膜或标签。请注意静电问题。 
在尝试任何修理之前,请确保自己接地是ESD(静电放电)带。这将防止静电损坏手机内的电子元件。 
确保您戴上护目镜并小心不要用玻璃碎片割伤手指。 
2. 模拟测试 
屏幕总成是非常脆弱的产品。我们强烈建议在安装前进行模拟测试,(主板 LCD或屏幕)连接音频线和新的更换,开机,测试完成。如果测试正常,请安装它。如果无法显示,请在第一时间联系我们。请不要强迫它安装在手机上。一旦安装了屏幕,我们将不负责任。 
3. 不要过度弯曲电缆 
请确保LCD电缆不要过度弯曲。弯曲超过90度将导致黑屏。

优点
1. 库存量大,交货快,可满足大量采购计划
2. 原装顶级品质
3. 完整的配合和工作
4. 提供专业的服务质量保证

关于产品
1. 用于iPhone 6s的LCD屏幕
2. 更换旧的,破损,破裂,损坏的LCD屏幕
3. 使您的设备看起来比以往更清晰 
4. 完全适合
5. 每个项目已经在发货前检查并保持良好状态
6. 强烈建议进行专业安装。一旦安装了屏幕,我们将不负责任

规格与包装:
通用
兼容性
常见规格
尺寸 135 * 64 * 0.5 cm / pcs
重量 67 g / pcs
包裹重量
单个产品重量 0.54kgs / 1.19lb
装箱数量 10
整箱重量 5.60kgs / 12.35lb
整箱尺寸 40cm * 40cm * 25cm / 15.75inch * 15.75inch * 9.84inch
销量排名
#9464 所属类别: 维修配件
#45 所属类别: 维修配件 »  iPhone 6S维修配件
#8 所属类别: 维修配件 »  iPhone 6S维修配件 »  液晶屏
LCD is Bubble Bag Protected, we will not offer warranty for installation.

更多图片

IP6S5013WT
IP6S5013WT
IP6S5013WT
IP6S5013WT
IP6S5013WT
IP6S5013WT
IP6S5013WT
礼品将与订单一起发送:
S-IP5G-0292

指南: iPhone 6s Display Replacement

Use this guide to replace the front panel assembly. To reassemble your device, follow these instructions in reverse order.

Buy these parts and tools
Download Guide

Step 1 - Battery Connection

  • Power off your iPhone before beginning disassembly.
  • Remove the two 3.4 mm Pentalobe screws surrounding the Lightning connector.

Step 2

  • If you don't have an LCD Screen Opener, use a single suction cup to lift the front panel:
  • Press a suction cup onto the screen, just above the home button.
  • Be sure the cup is pressed securely onto the screen to get a tight seal.

Step 3

  • There is a notch on the underside of the display just above the headphone jack that is the safest place to begin prying the phone open.
  • Pull up on the suction cup to slightly separate the front panel assembly from the rear case.
  • Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices and is held down with adhesive.
  • Once a small gap has been opened, insert the flat end of a spudger above the headphone jack.

Step 4

  • Twist the spudger to open the gap more and break it free from the adhesive.
  • Keep pulling up on the suction cup while twisting the spudger.

Step 5

  • Use the edge of a spudger to slice through the adhesive on either side of the phone.

Step 6

  • Use the edge of a spudger to slice through the adhesive on either side of the phone.

Step 7

  • Use the suction cup to open the display, breaking the last of the adhesive.
  • Don't open the display more than 90 degrees, as it is still connected at the top by three cables that may break if stretched.

Step 8

  • Lean the display against something to keep it propped up while you're working on the phone.

Step 9

  • Remove the following screws from the battery connector bracket:
  • One 3.0 mm Phillips #00 screw
  • One 2.3 mm Phillips #00 screw

Step 10

  • Remove the metal battery connector bracket from the iPhone.

Step 11

  • Use the flat end of a spudger to disconnect the battery connector from the logic board.
  • Push the connector to the side to ensure it doesn't accidentally make contact and power on the phone while you're working on it.

Step 12 - Display

  • While holding the front panel open at about a 90 degree angle, remove the following screws securing the front panel assembly cable bracket:
  • Three 1.3 mm Phillips #00 screws
  • One 3.0 mm Phillips #00 screw
  • Don't lose track of this screw! It's very important that the one 3.0 mm screw goes in the top-right corner of the plate. Anywhere else may cause damage to the logic board.

Step 13

  • Remove the front panel assembly cable bracket from the logic board.

Step 14

  • In the next three steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.
  • Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector.

Step 15

  • Use the flat end of a spudger to disconnect the display data cable connector.
  • When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery connector.

Step 16

  • Finally, use the flat end of a spudger to disconnect the digitizer cable connector.

Step 17

  • Remove the display assembly from the rear case.

评论

平均分
5 星
4-5 星:
100%
3 星:
0%
1-2 星:
0%
购买这个产品并撰写高质量的评论可以获得10SUNSKY积分($0.20).
Tesa*****onte
from Orleans
France
  Order #: 1703303920   SKU: IP6S5013BT  
04/10/2017 00:04
Caro*****ess
from lausanne
Switzerland
  Order #: 1703063913  
03/15/2017 06:51
Mr. ROB*****ARRILLO
from Ascoli Piceno
Italy
  Order #: 1608093929  
08/17/2016 04:39
Shali*****organ
from Manchester
United Kingdom
  Order #: 1608025122  
08/12/2016 03:41
Danie*****laway
from Ancona
Italy
  Order #: 1607075120  
07/15/2016 05:27
Ole*****tyi
from Kyiv
Ukraine
  Order #: 1606033521  
06/13/2016 06:32


运输方式

请选择数量和所在国家/地区,然后按[计算]。可以得到不同运输方式的价格
国家/地区:

买家推荐


消息

发现价格
产品型号:
* 以较低价格出售的网址:
备注/详细信息:
错误报告
产品型号:
错误网址:
* 输入错误:
说明:
错误图片:
(gif/jpg/png, 500KB max)
 
 
到货通知订阅

产品型号:
请留下您的电子邮件和姓名,我们会在此商品有货时立即向您发送电子邮件和留言。
* 您的Email:
您的姓名:
* 数量:
[$119.23] 5个/装 苹果iPhone 6s 液晶屏总成 带前置摄像头
5 超出 5 基于 6 用户评分