產品類別
批發: $10.64
一箱200個: $2170.00 $2086.00
在App中購買

掃描產品的二維碼直接購買。

按照以下步驟操作:

1.轉到Google和Apple市場下載安裝應用

2.打開SUNSKY App並掃描左側二維碼

SUNSKY APP
   ≥ 1 個 $10.85  
   ≥ 2 個 $10.75  
   ≥ 1/4 箱 $10.64  
   ≥ 1/2 箱 $10.53  
   ≥ 1 箱 $10.43  
   ≥ 4 箱 $10.32  
   ≥ 10 箱 $10.21  
選項:  
批量購買
添加到購物車
立即購買
國家/地區:
運費:   運輸方式:
其它方式
快遞 運費 運輸時間
Avatar
銷售經理: Ms. Emily
+86-13144828556
+86-13144828556
+86-13144828556
我們一直努力做到低價和好的品質,並承諾保價和退換貨服務。
查看售後條款
IP6S0588W
  • IP6S0588W
  • IP6S0588W
  • IP6S0588W
  • IP6S0588W
  • IP6S0588W
  • IP6S0588W
  • IP6S0588W
  • IP6S0588W
產品型號: IP6S0588W
Click Count 8224 點擊次數

特色產品

維修配件

最近瀏覽

免費禮物 (禮品將和當前產品一起發送)

描述

關於產品
1. 適用於iPhone 6s的替換LCD屏幕 觸摸屏数字轉換器組件。
2. 更換舊的,破損的,破裂的,損壞的。
3. 讓您的設備看起來比以往更清爽。
4. 完全適合和應用。
5. 每件商品在發貨前都經過檢查並處於良好狀態。
6. 強烈建議專業安裝。一旦安裝了屏幕,我們將不負責任。

安裝前注意事項
1. 提示1:安裝前 
測試時,請勿取下任何保護膜或標籤。請注意靜電問題。 
在嘗試任何修理之前,請確保自己接地是ESD(靜電放電)帶。這將防止靜電損壞手機內的电子元件。 
確保您戴上護目鏡並小心玻璃碎片割傷手指。 
2. 提示2:模擬測試 
屏幕更換是非常脆弱的產品。我們強烈建議在安裝前進行測試,這意味着手機分開,(主板 LCD或屏幕)連接音頻線和新的更換,開機,測試完成。如果測試正常,請安裝它。如果無法显示,請在第一時間聯繫我們。請不要強迫它安裝在手機上。一旦安裝了屏幕,我們將不負責任。 
3. 提示3:不要過度彎曲電纜 
請確保LCD電纜不要過度彎曲。彎曲超過90度將導致黑屏显示。

優點
1. 庫存量大,交貨快,可滿足大量採購計劃
2. 原裝頂級品質 
3. 完整的配合和應用  
4. 提供專業的服務質量保證

規格與包裝:
通用
兼容性
包裹重量
單個產品重量 0.11kgs / 0.25lb
装箱数量 200
整箱重量 13.00kgs / 28.66lb
整箱尺寸 48cm * 38cm * 27cm / 18.9inch * 14.96inch * 10.63inch
銷量排名
#23 所屬類別: 維修配件
#1 所屬類別: 維修配件 »  iPhone 6S維修配件
#1 所屬類別: 維修配件 »  iPhone 6S維修配件 »  LCD屏
LCD is Bubble Bag Protected, we will not offer warranty for installation.

更多圖片

IP6S0588W
IP6S0588W
IP6S0588W
IP6S0588W
IP6S0588W
IP6S0588W
IP6S0588W
IP6S0588W
禮品將與訂單一起發送:
S-IP5G-0292

指南: iPhone 6s Display Replacement

Use this guide to replace the front panel assembly. To reassemble your device, follow these instructions in reverse order.

Buy these parts and tools
Download Guide

Step 1 - Battery Connection

  • Power off your iPhone before beginning disassembly.
  • Remove the two 3.4 mm Pentalobe screws surrounding the Lightning connector.

Step 2

  • If you don't have an LCD Screen Opener, use a single suction cup to lift the front panel:
  • Press a suction cup onto the screen, just above the home button.
  • Be sure the cup is pressed securely onto the screen to get a tight seal.

Step 3

  • There is a notch on the underside of the display just above the headphone jack that is the safest place to begin prying the phone open.
  • Pull up on the suction cup to slightly separate the front panel assembly from the rear case.
  • Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices and is held down with adhesive.
  • Once a small gap has been opened, insert the flat end of a spudger above the headphone jack.

Step 4

  • Twist the spudger to open the gap more and break it free from the adhesive.
  • Keep pulling up on the suction cup while twisting the spudger.

Step 5

  • Use the edge of a spudger to slice through the adhesive on either side of the phone.

Step 6

  • Use the edge of a spudger to slice through the adhesive on either side of the phone.

Step 7

  • Use the suction cup to open the display, breaking the last of the adhesive.
  • Don't open the display more than 90 degrees, as it is still connected at the top by three cables that may break if stretched.

Step 8

  • Lean the display against something to keep it propped up while you're working on the phone.

Step 9

  • Remove the following screws from the battery connector bracket:
  • One 3.0 mm Phillips #00 screw
  • One 2.3 mm Phillips #00 screw

Step 10

  • Remove the metal battery connector bracket from the iPhone.

Step 11

  • Use the flat end of a spudger to disconnect the battery connector from the logic board.
  • Push the connector to the side to ensure it doesn't accidentally make contact and power on the phone while you're working on it.

Step 12 - Display

  • While holding the front panel open at about a 90 degree angle, remove the following screws securing the front panel assembly cable bracket:
  • Three 1.3 mm Phillips #00 screws
  • One 3.0 mm Phillips #00 screw
  • Don't lose track of this screw! It's very important that the one 3.0 mm screw goes in the top-right corner of the plate. Anywhere else may cause damage to the logic board.

Step 13

  • Remove the front panel assembly cable bracket from the logic board.

Step 14

  • In the next three steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.
  • Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector.

Step 15

  • Use the flat end of a spudger to disconnect the display data cable connector.
  • When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery connector.

Step 16

  • Finally, use the flat end of a spudger to disconnect the digitizer cable connector.

Step 17

  • Remove the display assembly from the rear case.

評論

平均分
4.9 星
4-5 星:
100%
3 星:
0%
1-2 星:
0%
購買這個產品並撰寫高質量的評論可以獲得10SUNSKY積分($0.20).
Fida*****gora
from Basel
Switzerland
  Order #: 1912265558   Color: White  
01/10/2020 17:48
Kol***os
from lavrio
Greece
  Order #: 1912185554   Color: Black  
12/28/2019 13:56
Na**ga
from Martigny
Switzerland
  Order #: 1910256446   Color: White  
12/17/2019 03:28
Geor*****7000
from PARIS 12
France
  Order #: 1911264839   Color: Black  
12/09/2019 20:00
SUNSKY: Thanks for your trust.
回復者 peggy
Geor*****7000
from PARIS 12
France
  Order #: 1911264839   Color: White  
12/09/2019 19:57
SUNSKY: Thanks for your trust.
回復者 peggy
Eug*****984
from Roma
Italy
  Order #: 1809232563   Color: Black  
10/08/2019 05:02
Eug*****984
from Roma
Italy
  Order #: 1809232563   Color: White  
10/08/2019 05:02
Eug*****984
from Roma
Italy
  Order #: 1810202530   Color: White  
10/08/2019 04:58
Bigc*****tech
from Australia
 
09/25/2019 05:13
IDa***le
from Bari
Italy
  Order #: 1908315937   Color: Black  
09/11/2019 16:56


運輸方式

請選擇數量和所在國家/地區,然後按[計算]。可以得到不同運輸方式的價格
國家/地區:


消息

發現價格
產品型號:
* 以較低價格出售的網址:
備註/詳細信息:
錯誤報告
產品型號:
錯誤網址:
* 輸入錯誤:
說明:
錯誤圖片:
(gif/jpg/png, 500KB max)
 
 
到貨通知訂閱

產品型號:
請留下您的电子郵件和姓名,我們會在此商品有貨時立即向您發送电子郵件和留言。
* 您的Email:
您的姓名:
* 數量:
[$10.64] 4.7英寸 iPhone 6S 友達 國產 液晶屏總成
4.9 超出 5 基於 35 用戶評分